Quick start guides, Qsg 1-playback and mixing, Preparing to listen to the demo song – Tascam DP-004 User Manual

Page 11: 2–quick start guides, Qsg 1–playback and mixing

Advertising
background image

2–Quick Start Guides

TASCAM DP-004

11

QSG 1–Playback and mixing

First, we will play the demo song on the included

SD card. The SD card with the demo song is shipped

already installed in the battery compartment on the

bottom of the unit, but we will start by explaining

how to insert an SD card here.

Preparing to listen to the demo song

1 Open the battery compartment and insert the

SD

Card

into the slot.

CAUTION

Do not insert the card backwards or apply unnec-

essary force. This could damage the slot or card.
Do not remove the SD card when the unit’s power

is ON. Make sure the unit power is OFF before you

remove the card. If you remove the SD card while

the power is ON, all recordings and settings since

the last time the unit was shutdown or a song was

saved will be lost. Lost data cannot be recovered.

NOTE

To use a new SD card or card that has been used with

another device with this unit, it is necessary to format it

first. A screen prompting you to format it appears if you

insert such an SD card.

2 Insert four AA batteries into the compartment,

paying attention to the plus/minus (+/–) orienta-

tion. This unit can use alkaline or NiMH batteries.

Advertising