Tascam DP-004 - Manual (Page 21)

2–Quick Start Guides
TASCAM DP-004 21
TIP
Use the track 1 PAN knob to set the stereo position of •
the track signal.
If you are not satisfied with the recorded sound,
•
follow the procedures above again from the
beginning. If you are satisfied with this recording
continue to the next section.
Adding another recording (1)—record guitar
to track 2
Now, you will record lead guitar on track 2 while
listening to the rhythm guitar on track 1. This time,
you will need to change the track 2 record source.
1 Press the ASSIGN key to open the
INPUT ASSIGN
screen.
The input channels ( INPUT A or INPUT B ) that are the
recording sources for each track are shown. In the
initial setting, INPUT A is assigned as the recording
source for tracks 1 and 3, and INPUT B is assigned
as the recording source for tracks 2 and 4.
2 Press the F4 (¶) key to select
TRACK 2
to change its
current input channel from the default of
IN B
.
3 Turn the DATA wheel to set the input to
IN A
.