Tascam DP-004 - Manual (Page 75)

7–Recorder Functions
TASCAM DP-004 75
Using repeat playback
1 Set the starting (IN) and ending (OUT) points for
the time that you want to repeat, and then return
to the Home Screen.
2 Press the REPEAT key to start repeat playback.
The repeat icon on the Home Screen appears.
Repeat icon
Playback starts from the IN point. When the OUT
point is reached, after the repeat interval elapses,
playback starts again from the IN point. Playback
continues to repeat between the IN and OUT
points.
3 Press the REPEAT key again to stop repeat
playback. The repeat icon on the Home Screen
disappears.
The next section explains how to set the repeat
interval that determines the amount of time until
playback starts again after the OUT point is reached.
Setting the interval between repetitions
The interval can be set from 0.5 to 9.9 seconds.
1 Press the MENU key to open the
MENU
screen.
2 Turn the DATA wheel to select
PREFERENCE
, and press
the F4 (¥) key to open the
PREFERENCE
screen.
3 Use the F3 (§) and F4 (¶) keys to select the setting
value for the
Repeat Int
item. Turn the DATA wheel
to set the value from 0.5 to 9.9 sec. in 0.1-sec. units.
4 When finished making settings, press the HOME
key to return to the Home Screen.