Tascam DP-004 - Manual (Page 88)

88 TASCAM DP-004
10–Editing Tracks
NOTE
If you choose the same track for both the SOURCE TRK
and the DESTINATION TRK and press the F2 (EXEC) key,
the “Same Track” message appears and the operation is
cancelled.
CLEAN OUT (track erase)
This completely erases the selected track. This
erases the entire track, so the IN and OUT points
have no effect.
There is only one parameter.
CLEAN OUT TRK
Select the track or tracks to erase. The choices are
1
to
4
(single track),
1/2
,
3/4
(track pairs) and
1–4
(all
tracks).
After setting the parameter, press the
F2 ( EXEC )
key
to execute the edit. Press the
F1 ( BACK )
key to return
to the
TRACK EDIT
menu screen without editing.
SILENCE (part erase)
This erases the selected track between the IN and
OUT points. This has the same effect as recording a
silent signal between the IN and OUT points. This
operation does not change the track length.