Tascam DP-004 - Manual (Page 9)

TASCAM DP-004 9
The four keys beneath the LCD display are called
function keys, and are referred to as
F1
,
F2
,
F3
and
F4
from left to right. The functions displayed at the
bottom of the screen above the keys are sometimes
shown after the key name in parentheses (e.g.
F4 (¥)
key,
F2 ( EXEC )
key).
TIP We give hints and tips on using the DP-004
when you see this icon.
NOTE
A note provides additional explanations for
special situations.
CAUTION
A caution shows that you may lose data
(recordings) if you do not follow the instructions.
WARNING Warnings should be taken seriously.
They describe situations which can cause injury or
damage to the equipment if you do not follow the
instructions.
This manual cannot begin to be a full guide to
multitrack recording techniques. However, if you
search the Internet or visit a library you should find
various documents on recording.
Product parts
You should find these items in the box:
Main unit • ................................................................... 1
SD Card (in the unit) • ................................................. 1
USB Cable • ................................................................. 1
AA alkaline batteries • ................................................ 4
Owner's Manual (this document) • .............................. 1
Warranty card • ............................................................ 1
If any of these items is missing, contact your
TASCAM supplier.
Trademarks
The SD Logo is a trademark.
Microsoft, Windows, Windows 2000, Windows XP,
and Windows Vista are either registered trademarks
or trademarks of Microsoft Corporation in the
United States and/or other countries.
1–Introduction