Tascam DP-004 - Manual (Page 17)

2–Quick Start Guides
TASCAM DP-004 17
NOTE
INT.MIC B-Low, INT.MIC B-Mid, INT.MIC B-High change
the sensitivity of the built-in mics. Set it according to the
loudness of the subject being recorded.
If you are not sure which setting to use, choose INT.
MIC B-Low. If the input level is too low after adjusting it
later, return to this screen and change the setting to INT.
MIC B-Mid. If the input level is still too low, change this
setting to INT.MIC B-High.
7 After changing the setting, press the HOME key to
return to the Home Screen.
NOTE
The MODE item on the INPUT SETTING screen is used
to set the input monitoring mode. Set to STEREO, input
signals from INPUT A and INPUT B channels are output
separately on the L and R channels, respectively. Set to
MONOx2, input signals from both INPUT A and INPUT
B channels are output as a combined mono signal from
both the left and right channels.
Loading a song file
After listening to the demo song, follow these
procedures to load
SONG001
to record your song.
1 With the transport stopped and the Home Screen
open, press the MENU key to open the
MENU
screen.
2 Use the DATA wheel to select
SONG
and press F4 ( ¥ )
to open the
SONG
menu screen.
3 Use the DATA wheel to select
LOAD
and press F4 ( ¥ )
to open the
SONG LOAD
screen. A list of the songs
appears.