Tascam DP-004 - Manual (Page 16)

16 TASCAM DP-004
2–Quick Start Guides
The
IN A
and
IN B
items are used to set the input
sources for the INPUT A and INPUT B channels.
At first, the input source for
IN A
( INPUT A channel)
is already selected.
4 Use the DATA wheel to change the
IN A
input source
to
GUITAR/LINE
.
5 Press the F4 ( ¶ ) key to select the current input for
IN B
( INPUT B channel).
6. Use the DATA wheel to set the
IN B
input source to
INT.MIC B-Low
,
INT.MIC B-Mid
or
INT.MIC B-High
.
This sets MIC B , which is the built-in mic on the
right side of the front panel as the input source
for INPUT B .