TROY Group MAN-EXT2000 - Manual (Page 10)

Introduction 1-4
• AppleTalk spoofing capabilities for support of non-
bidirectional parallel printers
• AppleTalk binary support on printers that support the HP
Tagged Binary Communications Protocol
• IP address configuration via DHCP, BOOTP, rarp, arp,
serial port, XAdmin, or remote console.
- IP security to restrict printing based on IP address
• Optional DEC LN03 emulation (XConnect II and XConnect
100 only)
TROY XCD External Print Server Models
The TROY XCD External Print Server family includes the
following models:
• Pony Print Server The Pony Print Server is the industry's
smallest full-featured external print server. It plugs directly
into the parallel port of the printer, and supports a 10baseT
Ethernet interface. The Pony Print Server is available in the
following models:
PPS-8S IPX/SPX, TCP/IP, AppleTalk, DLC/LLC,
NetBEUI, Direct Mode IPX/IP, http
PPS-8 IPX/SPX*, TCP/IP, AppleTalk, Direct
Mode IPX/IP, LAT, http
PPS-8N IPX/SPX, TCP/IP, AppleTalk, DLC/LLC,
NetBEUI, Direct Mode IPX/IP, LAT,
VINES IP, http
*PPS-8 NDS support is limited to NPRINTER remote printer mode only
• XConnect II. The XConnect II is an external print server
that supports the LAT, TCP/IP, NetWare, and AppleTalk