Hp web jetadmin – TROY Group MAN-EXT2000 User Manual

Page 44

Advertising
background image

3-8 Management Methods

command to expand the downloaded file. Then use the Run
command again to execute the

SETUP.EXE

file in the

destination directory that you selected (this file is generally
in the

DISK1

subdirectory) and begin the installation.

Follow the instructions on the screen to complete the
installation.

Important:

Windows 98 requires either JetAdmin V2.54

(this version can be installed from the Microsoft Windows
98 CD by running the

S E T U P . E X E

file in the

DRIVERS/PRINTERS/JETADMIN/DISK1/

directory)

or V3.30 or later (available on the HP web site).

The TROY XCD print server will appear in the list of
configured print servers unless IPX is not running on the
computer and the print server is not configured with a valid
IP address. If this is the case, then select Device from the
menu bar and click on New. Select the desired print server
from the list of unconfigured devices and then press
Configure. Enter the requested information, including the IP
address, subnet mask, and gateway. Then click Close to
return to the list of configured print servers.

You may now select the print server from the list and click
on the Modify button (or select Device and then Modify
from the menu bar) to change the print server configuration.

HP Web JetAdmin

TROY XCD print servers work transparently with the HP
Web JetAdmin utility for Windows NT Advanced Server.
You can download this program at no charge from the HP
web site (

http://www.hp.com

). Use the Windows NT

Run command to expand the downloaded file. The files will

Advertising