TROY Group MAN-EXT2000 - Manual (Page 38)

3-2 Management Methods
To install XAdmin32 or XAdmin, insert the appropriate
diskette or CD-ROM in the computer, select Run from the
Windows menu, select Browse, choose the appropriate drive
(these programs are in the Utilities folder if you are using a
CD-ROM), and double click on
Setup.exe and then click
OK.
Note : XAdmin32 and other TROY XCD utilities are
available on the TROY XCD web site ( http://
www.troyxcd.com ) if you did not receive them on disk.
1. Follow the instructions on the screen to complete the
installation.
2. Double click on the XAdmin icon or use the Windows
95/NT 4.x Start button to select XAdmin in the XCD
folder in the list of Programs.
3. A list of configured print servers will appear. If you
are running XAdmin or if you are running NetWare
with XAdmin32, skip to step 4. If you are running
TCP/IP, then you must enter an IP address into the print
server as follows (refer to Chapters 4 or 7 for alternate
methods for configuring the IP address):
- Make sure that your computer is configured for
TCP/IP with a valid IP address configured for LAN
operation (not PPP dial-up; refer to your system
documentation for additional information).
Important Note: Consult your system manager
before assigning IP addresses to your computer or to
the print server in order to avoid duplications. If
your network does not have an officially assigned