TROY Group MAN-EXT2000 - Manual (Page 144)

11-8 LAT Network Configuration
where sharename is the share name associated with
the print queue and printername is the name of the
printer from Step 1.
PATHWORKS V4.X Server Setup Instructions:
1. Create a VMS queue as described in previous sections.
2. Run PCSA_MANAGER on the VMS system.
a. Type MENU to get the PCSA menu.
b. Select SERVICE OPTIONS
c.
Select ADD SERVICE (do not use the ADD
PRINTER QUEUE option, as this will add a PCL
printer reset that will affect PostScript printing.
d. Select PRINTER SERVICE
e.
Enter service name (pick any name)
f. Enter VMS queue name (previously defined)
g. Enter VMS form name (use the default if you do
not have a specific form defined)
PC Setup Instructions (All Versions):
1. Perform the following steps on the PC to connect to the
print service you created in the previous steps:
a. If you are using DOS, type the command USE
LPTx:\\node\service at the DOS prompt, where
x is the PC parallel port number, node is the
DECnet node name and service is the service name
picked previously. For example:
USE LPT1:\\VAX\LASER