Toshiba TF 610 - Manual (Page 14)

14 GB TF 610 TOSHIBA Installation
15-03 19:56 M 100%
PROGRAM SETUP DATA
STOP
2 x
Setting dialling method
There are two dialling methods. The
pulse-dialling method is normally used in
the public switched telephone network. If
your fax machine is connected to a
PABX*, the DTMF dialling method may
also be used. As the public network is
modernised, this dialling method may also
be used in the public network. If you are
in any doubt, first try the pulse-dialling
method (basic setting).
If the dialling procedure fails, try DTMP
dialling. How ever DTMF is the most
efficient.
✽ ) This function may not be available in
machines in certain countries.
Standby mode
Start the menu
Select submenu (2x)
Make your selection
Enter function number
Confirm with ENTER
Set dial method
Example: Tone
Page through the menu...
...until you reach the desired menu item
Example: 10PPS
Confirm with ENTER
Press STOP, return to standy
mode
DIAL METHOD 10PPS
DIAL METHOD TONE
Installation
ENTER
ENTER
PARAMETER NUMBER =_
✽