Toshiba TF 610 - Manual (Page 60)

60 GB TF 610 TOSHIBA
Temporarily activate TX
report
If output of the TX report is restricted with
function 02
function 02 function 02 function 02 function 02 ( see page 59 ), a general
printout of the TX report can be requested
for a set transmission job.
Load original
Remember:
Printed side face down
Document ready
Press TX report key
Preparation of TX report printout
Enter fax number
or enter alphabet dial or one-touch dial
number
Confirm with START
Document is transmitted, and TX report is
then printed out
TX REPORT
DOCUMENT SET
TX REPORT ON
ENTER TEL NUMBER
TEL: 12345
START
Advanced settings
Advanced settings
15-03 19:56 M 100%
2 x
RDC ACCEPTANCE OFF
RDC ACCEPTANCE ONE
PARAMETER NUMBER =_
STOP
ENTER
ENTER
Standby mode
Start the menu
Select submenu (2x)
Make your selection for the function
number
Enter function number
Confirm with ENTER
Current setting
Change setting
Confirm with ENTER
Press STOP, return to standby
mode
Remote maintenance
(COMLINE)
Your fax machine permits remote
diagnosis. This means that the internal
settings can be read and changed via a
telephone line. In order to ensure that
data protection is assured, COMLINE is
possible only after you enable your
machine for this facility.