Toshiba TF 610 - Manual (Page 17)

17 GB TF 610 TOSHIBA
Installation
PROGRAM SETUP DATA
LINE = PUBLIC LINE
2 x
Start the menu
Select submenu (2x)
Make your selection
Enter function number
Confirm with ENTER
Current setting
The fax machine waits for the
dial tone sent by the exchange
before dialling starts.
Page through the menu...
...until you reach the desired menu item
The setting INIT WAIT X SEC
involves a pause of X seconds
before dialling starts. The fax
does not
not not not not check the presence of
a dial tone.
Confirm with ENTER
Press STOP, return to standy
mode
LINE = PBX
Installation
STOP
ENTER
ENTER
PARAMETER NUMBER =_
Connection to PABX,
further settings
If you wish to connect your fax machine
to a PABX, further settings are necessary.
The following menu procedure sets
default values for connecting a fax
machine to PABXs. If the machine does
not operate perfectly, please refer to
page
56 for explanations concerning
connection to PABXs.