Toshiba TF 610 - Manual (Page 42)

42 GB TF 610 TOSHIBA
15-03 19:56 M 100%
JOB NR. 005 18:11
CANCEL
JOB NO.007 19:32
ENTER
ENTER
Transmit documents
Transmit documents
Stop transmission
You may inadvertently dial the wrong
partner or you may enter a wrong
number. You then have to interrupt this
procedure. It is possible for this procedure
to be situated between other jobs. As a
result of stack mode, it is possible for the
current transmission not to be directly
related to the actions of the operator.
These procedures are deleted by „paging“
through the job stack; search for the
appropriate job and delete the specific
job.
As the display indicates only the job
numbers and the time, it is advisable for
the job list to be printed out (
see page 50 )
in order to obtain a more precise
allocation.
Standby mode
Activate CANCEL
The first job is displayed
The time indicated after the job
number is the time at which the
job was entered.
Page through the various jobs
...until you reach the desired job
Confirm with ENTER
Are you sure?
Confirm with ENTER
The job is cancelled
JOB NBR. 15
JOB NBR. 9
JOB NBR. 8
JOB NBR. 6
JOB NBR. 5
JOB NBR. 4
JOB NBR. 3
JOB NBR. 2
JOB NBR. 1
JOB NBR. 7
JOB DELETE
JOB CANCELED
DELETED
DELETE OK ?