Toshiba TF 610 - Manual (Page 45)

45 GB TF 610 TOSHIBA
Store numbers
PRESS OT OR START
ENTER ABB NUMBER =
15-03 19:56 M 100%
ENTER DIAL NUMBER
ENTER ABB DIAL
ENTER GROUP DIAL
The procedure is the same as that
described on
page 43 (alphabet dialling)
If alphabet dial numbers have already
been entered, simply press the START
key until you arrive at this point in the
menu:
Input option: one-touch dial key
Press one-touch dial key
Make your selection for the next alphabet
dial number
-or-
Press STOP, return to standby
mode
Standby mode
Page through the menu...
...until you reach this menu item
Select submenu
Page through the menu...
...until you reach this menu item
Confirm with ENTER
Decision:
Enter: Go to A
Erasing the whole
group: Go to B
Erasing single numbers
from the group:
Go to C
ENTER
Go to A
Group keys
If you have a fixed number of partners to
whom you frequently send broadcast
transmissions, the stored broadcast
facility is just what you need. There are 6
methods of creating groups of your
choice. You can also assign four of these
groups to four special keys so that a
broadcast transmission can be initiated at
the push of a button. If a permanent
group is to be defined, all users of a
group must be already be in the alphabet
dial directory.
STOP
ENTER
1 x
Store numbers
One-touch dial keys
The one-touch dial facility is a very easy
method of dialling your partner. You can
store fax numbers on 16 keys. You need
only press one key in order to dial your
partner.
It is essential that the number has already
been stored under an alphabet dial
number previously.
ONE TOUCH NBR. 16
ONE TOUCH NBR. 15
ONE TOUCH NBR. 2
ONE TOUCH NBR. 1
ABB 1 ABB 2 ABB 3 + +
GROUP BROADCAST 1
ENTER:1 DELETE:2
ERASING
THE WHOLE
GROUP
Go to B
ERASING
SINGLE
NUMBERS
FROM THE
GROUP
Go to C
3x
ABB NO. 120
ABB NO. 119
•
•
•
ABB NO. 003
ABB NO. 002
ABB NO. 001