Univex PowerLite 700 - Manual (Page 18)

18 Setting Up the Projector
Unpacking the Projector
After unpacking the projector, make sure you have all these parts:
Save all packaging in case you need to ship the projector. Always use
the original packaging (or the equivalent) when you need to send the
projector to another location; see page 79 for instructions.
Additional Components
Depending on how you plan to use the projector, you may need
additional components:
■ To receive an HDMI signal from your video device, you’ll need
an HDMI cable. One may be provided with your video
equipment.
■ To receive a component video signal from a DVD player or other
video device, you’ll need a component video cable (one may be
provided with your video equipment) and the
component-to-VGA video adapter that came with the projector.
■ To receive an S-Video signal, you’ll need an S-Video cable. One
may be included with your video equipment, or you can purchase
one from Epson. See “Optional Accessories” on page 15.
■ To receive an audio signal, you’ll need an RCA-type audio cable
with two male plugs, or a stereo mini-jack audio adapter cable
(not necessary with HDMI connection).
Projector
Remote control
and batteries
PDF manual and
registration CD-ROM
Power cord
Component-to-VGA
video adapter