Univex PowerLite 700 - Manual (Page 63)

Fine-Tuning the Projector 63
Sleep Mode : Enable if you want the projector to turn off
automatically if it is idle and no signal is received for 1 to 30
minutes (you can adjust the amount of time using the next
setting).
Sleep Mode Timer : When Sleep Mode is on, you can set the
period of time before the projector turns off automatically, from
1 to 30 minutes.
Lens Cover Timer : Enabled by default to turn the projector’s
power off automatically when the A/V Mute slide is closed for
more than 30 minutes.
High Altitude Mode : Enable when you are using the projector
above 4,900 feet (1,500 meters) to ensure that the temperature is
regulated properly. Turn this setting off for lower elevations.
■ USB Type B
Select how you want to use the USB TypeB port. Select USB
Display to use the USB port to project computer images. Select
Page Up/Down to use the remote control to advance PowerPoint
slides. Select Wireless Mouse to use the remote control buttons
like a wireless mouse. See page 48 for restrictions and details.
■ Language
Select a language to use for the projector menus.
Using the Projector Security Features
To prevent unauthorized use of the projector, you can:
■ Assign a password. You can use the password to prevent the
projector from being turned on and prevent your custom startup
screen from being changed. See the next section.
■ Create a custom screen that is displayed at startup and/or when
the
A/V Mute button is pressed. The screen can be locked with a
password to discourage theft and provides a way to identify the
projector should it be stolen. See page 66.
note
Do not use the projector at
altitudes above 7,500 feet
(2,286 meters).