Univex PowerLite 700 - Manual (Page 34)

34 Setting Up the Projector
Inserting an SD Card
You can use an SD or SDHC ™ (SD High Capacity) card to store
images or PowerPoint presentation slides converted to .JPG files. This
lets you project your files without connecting to a laptop or PC. To
place your files on the card, copy them from your computer to the
card using a card reader.
1. Follow the instructions beginning on page 35 to turn on the
projector.
2. Insert the SD card face-up and contacts-down, and push it all the
way into the projector’s SD slot:
The indicator light beside the slot comes on or flashes when the
SD card is in use. Do not remove the card when the light is
flashing or on, or the Slideshow program is running.
3. If you are not connected to another image source, the Slideshow
program appears.
If you are connected to another image source, press the
Slideshow button on the remote control to start the Slideshow
program.
See page 50 for instructions on controlling the slideshow.
4. When you’re finished, press Esc and select Exit to exit the
Slideshow before removing the SD card.
Indicator
light
caution
Do not remove the card
when the indicator light is
flashing or on, or the
Slideshow program is
running, or you may
damage the card or
projector.