Univex PowerLite 700 - Manual (Page 67)

Fine-Tuning the Projector 67
Capturing the Image
Start by displaying the image you want to use from either a computer
or video source, such as a DVD player or digital camera. Then follow
these steps to capture the image and transfer it to the projector:
1. Press the Menu button on the remote control, highlight the
Extended menu, and press Enter .
2. Highlight User’s Logo and press Enter .
3. When you see a message asking Choose this image as the
User’s Logo? , select Yes and press Enter . A selection box
displays over the image.
4. Use the arrow buttons to select the area of the image you want to
use. Then press Enter .
5. When you see the message Select this image? , highlight Yes
and press Enter .
6. Use the arrow buttons to select a zoom factor (display size) and
press Enter .
7. When the message Save this image as the User’s Logo?
appears, select Yes and press Enter . Saving the logo may take a
few moments. Do not use your projector, remote control, or
video source while the logo is being saved.
8. When you see the message Completed , press Menu to exit.
note
When you choose an image
for the user’s logo, it erases
any previously used image.
You can save an image up to
300 × 400 pixels in size.
Once you have saved a new
user’s logo, you cannot
return to the factory default
logo.