Univex PowerLite 700 - Manual (Page 42)

42 Displaying and Adjusting the Image
The projector’s Auto Keystone function detects and corrects vertical
keystone distortion up to 11°. It takes about one second after the
projector starts for the image to be corrected.
If your image is still distorted, do one of the following:
■ Press the appropriate keystone correction button on the
projector’s control panel until the shape is evenly rectangular.
■ Select the Keystone setting in the projector’s Settings menu (see
page 61). Then use the arrow buttons on the remote control to
adjust the shape of the image.
Focusing and Zooming the Image
Turn the focus ring on the projector to sharpen the image.
To enlarge or reduce the image, turn the zoom ring.
If the image still isn’t large enough, you may need to move the
projector farther away from the screen.
Keystone correction
buttons