Univex PowerLite 700 - Manual (Page 24)

24 Setting Up the Projector
Connecting an HDMI Video Source
For the best image and sound quality, connect your video equipment
to the HDMI (High-Definition Multimedia Interface) port, if
possible.
Connect an HDMI cable to the HDMI connector on your player and
the
HDMI port on the projector.
When you’ve finished making connections, see page 35 for
instructions on turning on the projector and Chapter 2 for
instructions on displaying and adjusting the image.
note
If an HDMI cable was not
provided with your video
device, you can purchase one
from an electronics dealer.
HDMI port