Univex PowerLite 700 - Manual (Page 19)

Setting Up the Projector 19
Positioning the Projector
You can place the projector in a variety of viewing setups.
When projecting from the front, place the projector directly in front
of the center of the screen, facing the screen squarely. The center of
the lens should be about level with the bottom of the screen.
If you place the projector below screen level, you may need to tilt it up
by extending the front adjustable foot (see page 41). Tilting the
projector causes the image to become “keystone” shaped, but you can
correct the distortion (see page 41).
You can also install the projector on the ceiling using the optional
ceiling mounting hardware (see page 15). Use the projector
dimensions on page 14 to assist you in installing the projector.
note
After positioning the
projector, you may want to
connect a Kensington
MicroSaver
® anti-theft
device to the lock port on the
projector. You can purchase
this from Epson; see
page 15
.