Univex PowerLite 700 - Manual (Page 23)

Setting Up the Projector 23
Connecting to Video Equipment
You can connect several video sources to the projector at the same
time. Before starting, look at your video equipment to determine its
available video output connections:
■ If your video player has an HDMI connector, see “Connecting an
HDMI Video Source” on page 24.
■ If your video player has a component video port (three connectors
labeled either Y/Cb/Cr or Y/Pb/Pr), see “Connecting a
Component Video Source” on page 25.
■ If your video player has a yellow RCA video output connector, see
“Connecting a Composite Video Source” on page 26.
■ If your video player has an S-Video connector, see “Connecting
an S-Video Source” on page 27.
■ If your video player has an RGB video port, see “Connecting an
RGB Video Source” on page 28.
After connecting video cables, you may also want to connect an
optional audio cable to play sound through the projector; see page 32.
If you connect using an HDMI cable, the video and sound are both
transferred and you won’t need to connect any additional cables for
audio.