Univex PowerLite 700 - Manual (Page 64)

64 Fine-Tuning the Projector
■ Disable the projector’s buttons; this is useful, for example, in a
classroom when you want to ensure that no one touches the
projector’s buttons while you’re using the remote control. See
page 68.
■ Secure the projector to prevent theft using a cable locking system.
See page 69.
Enabling Password Protection
The default setting for the password is 0000 . Follow these steps to
create a new password:
1. Press the Freeze button on the remote control for five to seven
seconds. You see this screen:
2. Select the type(s) of password protection you want to use:
■ Power On Protect : Prevents unauthorized use of the
projector. After the projector is plugged in and turned on,
you must enter a password to use the projector. Select
On ,
press Enter , then press Esc to return to the Password Protect
screen.
■ User’s Logo Protect : Prevents your custom screen (see
page 66), display, and User’s Logo settings in the Extended
menu from being changed. Select
On , press Enter , then press
Esc to return to the Password Protect screen.
3. Use the arrow buttons to select Password and press Enter .
4. When you see a message asking if you want to change the
password, select Yes and press Enter .
caution
If you lose the remote
control, you will not be able
to enter the password. Keep
the remote control in a safe
place at all times. Also, it’s a
good idea to write down
your password.