Univex PowerLite 700 - Manual (Page 57)

Fine-Tuning the Projector 57
Restoring the Default Settings
You can use the Reset option on any menu to restore the
factory-default settings for the settings in that menu.
To restore all the projector settings to their factory-default values,
select the
Reset menu, highlight Reset All , press Enter , and select
Yes to confirm.
Adjusting the Image
You can use the Image menu to adjust the brightness, sharpness, color,
tint, contrast, and
Auto Iris settings.
1. Press the Menu button on the projector or remote control and
select the Image menu. You see a screen similar to one of these:
note
When you select Reset All
in the Reset menu, it does
not reset the Input Signal,
User’s Logo, Language, or
Lamp Hours settings.
note
If you are using the HDMI
port, you see the menu on
the left if the current signal
is digital RGB video, or the
menu on the right if the
signal is component video.
Computer/RGB video Component video/
Composite video/
S-Video