Limited warranty – Universal Laser Systems CLP-100NI-NPRT User Manual

Page 2

Advertising
background image

2

IMPORTANT NOTE

UNIVERSAL products are manufactured to exacting standards and every available step has been taken to assure your
complete satisfaction. It is most important, for best results, that you read and carefully follow the instructions contained in this
manual. Failure to do so may result in unsatisfactory performance, damage to the equipment and personal injury.

- LIMITED WARRANTY -

UNIVERSAL Non-Porous Conveyor Line Printers are guaranteed to be free from defects in materials and workmanship
for a period of 90 days from the date of purchase. Components found to be defective during this time will be repaired
free of charge if returned to the factory. Damage resulting from use of improper inks, improper installation, or operation
is not covered under the scope of this warranty. For warranty service please contact our Customer Service Department.

PREFACE
SPECIFICATIONS

CLP-100 Series
CLP-200 Series
Indexing and Non-Indexing Models
Mounting Configurations
Printing Dies
Ink Rolls

QUICK START

Installing the Inking System Assembly
Installing the Pre-Inked Roll
Installing the Printing Dies
Adjusting the Ink Roll Eccentric

BASIC PRINCIPLES OF OPERATION

Inking System
Using the 4 Oz. Reservoir Ink Cartridges
Selecting an Appropriate Ink
Ink Drying Time Considerations

WEB PRINTING

Mounting the Coder
Special Web Printing Applications
Printing on Narrow Web Materials
Printing directly on Master Rolls
Gang Mounting

CARTON PRINTING

Carton Alignment
Die Positioning for Indexing Applications

MAINTENANCE

Pre-Inking a New Ink roll
Cleaning the Transfer Roll
Cleaning the Coder
Cleaning the Printing Dies
Mounting Configuration Conversion
Replace Print Drun Index Springs
Removing and Replacing Index Block “B”
Inking System Assembly

PARTS DIAGRAMS & PARTS LISTS

3

4
5
6
6
7
8

9
10
14
15

16
16
17
18

20
21
21
21
22

23
25

27
28
28
29
30
34
35
37
39

Advertising