Specifications – Universal Laser Systems CLP-100NI-NPRT User Manual

Page 8

Advertising
background image

8

SPECIFICATIONS

INK ROLLS

Universal offers two ink roll options for the Non-Porous Conveyor Line Printers each with unique characteristics
which will help determine the suitability for a specific printing application. The coders are designed to accommo-
date both types of ink rolls without modification. A detailed review of your printing requirements will determine the
best choice of ink rolls for your particular application.

Universal’s XF Neoprene Ink Rolls are a re-inkable roll which
can be used with a variety of alcohol or glycol base inks. These
rolls are normally supplied in a dry condition with the coder and
require pre-inking prior to installation. Pre-inked rolls are avail-
able from the factory and are recommended for first time us-
ers.

During production printing, when the ink capacity of the roll is
depleted, installing a 4 Oz. Reservoir Ink Cartridge in the coder’s
reservoir Bottle Port will re-ink the roll automatically as produc-
tion continues.

In high speed web printing applications, Universal’s #100 Inks
provide drying times of approximately 2 seconds at 75 Degree
F. (24 Deg. C) ambient temperature. Many other inks, both dye
and pigment based, can be used in these ink rolls to meet the
specific application requirements. Refer to the Basic Principles
of Operation section on Page 16 for more information on se-
lecting an appropriate ink.

Universal’s Type MT Ink Rolls are disposable pre-inked rolls which
are available in a variety of fast drying colors. The MT Ink Rolls
provide excellent color density and adhesion on most materials
and an average yield of just under 500,000 impressions before
replacement is necessary. Since these rolls are not re-inkable,
all references in the manual regarding the use of 4 Oz. reservoir
Ink Cartridges should be disregarded when using these rolls on
your coder. The ability to operate the coder without a Reservoir
Ink Cartridge makes the MT Rolls particularly well suited for appli-
cations requiring printing on the bottom of web materials.

The Type MT Ink Rolls provide drying times between 4 - 7 sec-
onds at 75 Degree F. (24 Deg. C) ambient temperature. The
added convenience and simplicity of using the Type MT Ink Rolls
makes them an ideal choice when production operators have little
time to monitor the inking system.

XF NEOPRENE INK ROLLS

TYPE MT INK ROLLS

FIGURE 7

FIGURE 6

Advertising