Vanguard Managed Solutions 650 - Manual (Page 31)

Installing 650 Series Hardware 2-1
Chapter 2
Installing 650 Series Hardware
Overview
This chapter covers the installation of Vanguard 650 Series hardware and cables, and
describes serial port characteristics and associated features.
In This Chapter Topic See Page
Checking Your Shipment Contents .............................................................. 2-2
Choosing a Site ............................................................................................. 2-3
Cabling the 650 Series .................................................................................. 2-4
Powering Up the Vanguard 650 Series ......................................................... 2-7
Removing the Top Cover and Front Panel ................................................... 2-8
Follow These Steps This table lists the steps you need to perform and shows you where to look for
information on installing the Vanguard 650 Series:
Step To Perform This Action See This Procedure
1 Check the contents of the ship-
ping package to make sure
everything is included. “Checking Your Shipment Contents”
section on page 2-2
2 Choose a site for the 650 Series. “Choosing a Site” section on page 2-3.
3 Connect cables for the 650
Series. “Cabling the 650 Series” section on
page 2-4.
4 Power up the 650 Series “Powering Up the Vanguard 650 Series”
section on page 2-7.