Vanguard Managed Solutions 650 - Manual (Page 54)

3-16 Installing and Coldloading 650 Series Software
Installing Software
Vanguide Terminal
Overview The Vanguide Terminal (Figure 3-9) is a terminal emulator for communicating with
Vanguard devices using the CTP port. It supports basic ANSI/VT100 terminal
emulations, ignoring all escape characters for these sequences.
How To Use
Vanguide Terminal Follow these steps to connect to a 650 Series CTP using the Vanguide Terminal
utility.
Step Action
1 Cable your 650 Series to a personal computer running the Vanguide
application, as shown in “Cabling the 650 Series” on page 4.
2 From the Windows Program Manager, open the Vanguide Application
Manager icon.
3 Make sure your Communications port is set correctly.
4 Choose Vanguide Terminal. The Vanguide Terminal window appears
(Figure 3-9).
5 Press the Return key until the OK prompt appears. This means your PC is
connected to the 650 Series. If no OK prompt appears, check the physical
connection between the 650 Series and your personal computer.
6 Enter ATDS0 and press Return. The Control Terminal Port screen
appears (Figure 3-9).
Figure 3-9. Example of Vanguide Terminal Window