Vanguard Managed Solutions 650 - Manual (Page 62)

3-24 Installing and Coldloading 650 Series Software
Selecting a Predesigned Configuration
Restoring
Configurations
Using TFTP This table describes how to restore a configuration using TFTP
Step Action Result
1 Access the control port, and from
the Main menu, select
Configuration Save/Restore The Configuration Save/Restore
menu appears.
2 Select TFTP restore Configuration
from the Configuration Save/
Restore menu. The Enter file name: prompt
appears.
3 Enter the name of the
configuration file you wish to
restore. The Enter IP address: prompt
appears.
4 Enter the IP address of the TFTP
server. The Ready to initiate TFTP
transfer?: prompt appears.
5 Enter Y to start the transfer. The transfer begins. If it is
successful, the message
Operation
Successful. appears.
If the transfer fails, the message
Local Transfer Failure. appears.
6 Perform a warm boot to activate
the new CMEM.