Vanguard Managed Solutions 650 - Manual (Page 45)

Installing and Coldloading 650 Series Software 3-7
Installing Software
5 Set your communications package
to the same speed as the coldloader
you just downloaded, and use
RAW ASCII mode to send the
desired image. Depending on the image you are
downloading, and the speed
chosen, this takes 3-30 minutes to
complete, and during the procedure
the LED flashes regularly,
depending upon the download
speed. The node boots
automatically at the end of the
download procedure.
If base software is loaded and
operational, the node restarts with
no further intervention.
If base software is not present in
the node, the 650 returns to
coldload mode and waits to receive
base software.
6 Set your communications package
back to the previously configured
speed, and reaccess the CTP. The OK prompt appears, and your
new software image is loaded.
Step Action Response (continued)