Vanguard Managed Solutions 650 - Manual (Page 39)

Installing and Coldloading 650 Series Software 3-1
Chapter 3
Installing and Coldloading 650 Series Software
Overview
Introduction This chapter describes how to install and coldload operating software and
configuration memory files (CMEMs) for your 650 Series node. Please refer to the
Software Installation and Coldloading Manual (T0028) and Software Builder
Manual (T0030) for information on the use of the Vanguide Application Set and
Software Builder to create custom images and install them into your 650 Series
device.
Note
The procedures for software upgrade for a 650 Series product differs from that of
other Network Access Products. Please read the following information carefully
before initiating a software upgrade.
In This Chapter Topic See Page
650 Operating Software and Option Images ................................................ 3-2
Where to Get Operating Software ................................................................ 3-3
Installing Software ........................................................................................ 3-5
Coldloading 650 Series Operating Software ............................................ 3-6
Loading Software via TFTP Download ................................................... 3-8
Downloading Software Using the Software Loader ................................ 3-10
Downloading Configuration Memory (CMEM) ...................................... 3-14
Vanguide Terminal ................................................................................... 3-16
Linking Software Images Using Software Builder .................................. 3-18
Selecting a Predesigned Configuration ........................................................ 3-19
Selecting a Predesigned Configurations Using the CTP .......................... 3-20
Saving and Restoring Configurations Using Kermit ............................... 3-21
Saving and Restoring Configurations Using TFTP ................................. 3-23
Follow These Steps This table lists the steps to perform and shows you where to look for information
when installing operating software and CMEM files for your 650 Series device.
Step To Perform This Action See This Procedure
1 Obtain the operating software you
want to install on the 650 Series. “Where to Get Operating Software”
on page 3.
2 Obtain the Configuration Memory
(CMEM) file you want to install
on the 650 Series. “Where to Get Operating Software”
on page 3.
3 Download the operating software
and CMEM file to the 650 Series. “Installing Software” on page 5.