Vista Ademco N7227V5 - Manual (Page 5)

1–1
S E C T I O N 1
Introduction
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
In This Section
♦
Description
♦
Features
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
Description
The VISTA–10SE is a control that supports up to 22 hardwired and wireless zones, plus
remote keypads.
Features
Basic Hardwired Zones
Provides 6 basic hardwired zones having the following characteristics:
•
Zones 1-6 response time is 300–500 milliseconds.
•
Zone 3 programmable fast response time is 10–15 milliseconds.
•
EOLR supervision supporting N.O. or N.C. sensors
•
Zone 5 supports as many 4-wire smoke or heat detectors as can be powered from the
control).
•
Zones 7, 95, and 96 are keypad Panics.
•
Zone 8 is Duress.
•
Zone 9 is Tamper.
Optional Expansion Zones
Wireless Expansion:
•
Supports up to 16 wireless zones.
• Requires the use of a 5881 (5882 in Canada) type RF receiver (with 5800 Series wireless
transmitters), as shown below.
Receiver Model No. of Zones Transmitter Type
5881L (5882L*) Up to 8 5800
5881M (5881M*) Up to 16 5800
5881H (5882H*) Up to 16 5800
* Used in Canada.
Remote Keypads
Up to 4 of any of the following keypads may be used:
Fixed-Word Keypads: 6127*, 6128, and 6137.
* This keypad cannot be used if a 4285/4286 VIP Module is being used.
Alpha Keypads 6139 (2-line alphanumeric display).
6138 (1-line alphanumeric display).
When programming from a keypad, a 6139 2-line alpha keypad must be connected (but need
not stay in the system).