Xantrex Technology GT3.0 - Manual (Page 28)

Introduction
1–8 975-0131-01-01
Model Configurations
The GT Inverter model number is in the format GTx.x-aa-bb-ccc, where:
• x.x Output Power: 3.0 KW
• aa Region: NA (North America)
DE (Germany)
SP (Spain)
IT (Italy)
FR (France)
• bb Wiring Box: WB (wiring box only)
DS (wiring box with AC/DC disconnect switch)
HW (no wiring box)
QC (Quick Connects and no wiring box , Europe
only, not available at this time)
• ccc Output Voltage: 208 Vac/60 Hz (North America) 3 phase
230 Vac/50 Hz (Europe) 3 phase
240 Vac/60 Hz (North America).
See Figure 1-3 on page 1–5 for data label location.
Table 1-1 shows the different model configurations available.
Installation and wiring instructions are provided in Chapter 2, “Installation”, and
Chapter 3, “Wiring the Inverter”.
Table 1-1 GT Inverter Models
Model Number
Output
Power
(x.x)
Output
Voltage
(ccc)
Wiring Box (bb)
WB DS HW QC
GT3.0-NA-bb-208
1
1. 208 Vac/60 Hz and 230 Vac/50 Hz models not available at this time
3.0
208
√ √ √
GT3.0-aa 2 -bb-230 1
2. any region (aa) except NA
230
√ √ √ √
GT3.0-NA-bb-240 240
√