Xantrex Technology GT3.0 - Manual (Page 97)

Electrical Specifications
975-0131-01-01 A–3
Adjustable Disconnect Settings
The adjustable disconnect setting values vary depending on whether the inverter is
a 208 Vac/60 Hz, 240 Vac/60 Hz, or 230 Vac/50 Hz model. Utility permission is
required prior to changing the settings on the inverter.
The default values of these settings differ from the utility specifications on
page A–2. These differences take into account the accuracy ranges listed in the
table below, and are intended to ensure that utility specifications are always met.
Output Power Versus Ambient Temperature
Once the heat sink on the inverter reaches a maximum temperature limit, the GT
Inverter reduces its energy output to ensure maximum component ratings are not
exceeded.
Setting
Default Values Adjustment Range
Accuracy 208 Vac/60 Hz 240 Vac/60 Hz 230 Vac/50 Hz From... To...
AC Low Voltage 186 Vac 214 Vac 205 Vac
180 Vac 269 Vac +/– 3 Vac
AC High Voltage 225 Vac 261 Vac 250 Vac
AC Low Frequency 59.4 Hz 47.1 Hz
46.0 Hz 62.0 Hz +/– 0.1 Hz
AC High Frequency 60.4 Hz 50.9 Hz
Reconnect Delay 305 sec. 60 sec. 600 sec. +/– 5 sec.
Figure A-1 Output Power vs. Ambient Temperature
GT3.0 GRID TIE SOLAR INVERTER
Output Power versus Ambient Temperature
0
500
1000
1500
2000
2500
3000
3500
-25 -15 -5 5 15 25 35 45 55 65
Ambient Temperature (C)
P
o
w
e
r (W
a
tts
)
Standard Unit w/ Optional Fan Kit