Xantrex Technology Link 1000 - Manual (Page 14)

Reading the Link 1000 Control Panel
6
Where to go From Here
• To install the Link 1000, see page 7 .
• To set up the Link 1000, see page 19 .
• To use the Link 1000, see page 35 .
• To call for technical support, see page 56 .
8 AC IN LED
Indicates that AC power is present.
9 CHARGER STATUS LEDs:
• CHG (Red): When this LED is on solid, the battery is
in Bulk charge mode. When this LED is flashing, the
battery is equalizing.
• ACCEPT (orange): The battery is in Acceptance
mode.
• FLOAT (green): The battery is in Float mode.