ZyXEL Communications GS-4012F/4024 - Manual (Page 269)

GS-4012F/4024 User’s Guide
268 Chapter 42 Introducing Commands
classifier <name> <[packet-
format
<802.3untag|802.3
tag|
EtherIIuntag|
EtherIItag>]
[priority <0-7>]
[vlan <vlan-
id>][ethernet-
type <ether-
num|ip|ipx|
arp|rarp|
appletalk|decnet|
sna|netbios|dlc>]
[source-mac <src-
mac-addr>]
[source-port
<port-num>]
[destination-mac
<dest-mac-addr>]
[dscp <0-63> ]
[ip-protocol
<protocol-
num|tcp|udp|icmp|
egp|
ospf|rsvp|igmp|
igp|pim|ipsec>
[establish-only]]
[source-ip <src-
ip-addr> [mask-
bits <mask-
bits>]] [source-
socket <socket-
num>]
[destination-ip
<dest-ip-addr>
[mask-bits <mask-
bits>]]
[destination-
socket <socket-
num>] [inactive]>
Configures a classifier. A
classifier groups traffic into data
flows according to specific criteria
such as the source address,
destination address, source port
number, destination port number
or incoming port number.
13
help Displays help information for this
command.
13
cluster <vlan-id> Enables clustering in the
specified VLAN group.
13
member <mac-
address> password
<password-str>
Sets the cluster member. 13
name <cluster
name>
Sets a descriptive name for the
cluster.
13
rcommand <mac-
address>
Logs into the CLI of the specified
cluster member.
13
Table 106 Command Summary: Configuration Mode (continued)
COMMAND DESCRIPTION PRIVILEGE