ZyXEL Communications GS-4012F/4024 - Manual (Page 290)

GS-4012F/4024 User’s Guide
Chapter 42 Introducing Commands 289
42.12 mvr Commands
The following table lists the mvr commands in configuration mode.
inactive Disables the specified VLAN. 13
ip address <ip-address>
<mask>
Sets the IP address of the switch
in the VLAN.
13
<ip-address>
<mask> manageable
Sets the IP address of the switch
in the VLAN and allow remote
management to this IP address.
13
default-gateway
<ip-address>
Sets the default gateway IP
address in this VLAN.
13
name <name-str> Specifies a name for
identification purposes.
13
no fixed <port-list> Sets fixed port(s) to normal
port(s).
13
forbidden <port-
list>
Sets forbidden port(s) to normal
port(s).
13
inactive Enables the specified VLAN. 13
ip address <ip-
address> <mask>
Deletes the IP address and
subnet mask from this VLAN.
13
ip address
default-gateway
Deletes the default gateway from
this VLAN.
13
untagged <port-
list>
Specifies the port(s) you want to
tag all outgoing frames
transmitted with this VLAN Group
ID.
13
normal <port-
list>
Specifies the port(s) to
dynamically join this VLAN group
using GVRP
13
untagged <port-
list>
Specifies the port(s) you don’t
want to tag all outgoing frames
transmitted with this VLAN Group
ID.
13
Table 109 Command Summary: config-vlan Commands (continued)
COMMAND DESCRIPTION PRIVILEGE
Table 110 Command Summary: mvr Commands
COMMAND DESCRIPTION PRIVILEGE
mvr <vlan-
id>
Enters the MVR (Multicast
VLAN Registration)
configuration mode.
13
exit Exist from the MVR
configuration mode.
13