ZyXEL Communications GS-4012F/4024 - Manual (Page 291)

GS-4012F/4024 User’s Guide
290 Chapter 42 Introducing Commands
group <name-str>
start-address
<ip> end-address
<ip>
Sets the multicast group range
for the MVR.
13
inactive Disables MVR settings. 13
mode <dynamic|
compatible>
Sets the MVR mode (dynamic
or compatible).
13
name <name-str> Sets the MVR name for
identification purposes.
13
no group Disables all MVR group
settings.
13
group <name-str> Disables the specified MVR
group setting.
13
inactive Enables MVR. 13
receiver-port
<port-list>
Disables the receiver port(s).An
MVR receiver port can only
receive multicast traffic in a
multicast VLAN.
13
source-port
<port-list>
Disables the source port(s).An
MVR source port can send and
receive multicast traffic in a
multicast VLAN.
13
tagged <port-
list>
Sets the port(s) to untag VLAN
tags.
13
receiver-port
<port-list>
Sets the receiver port(s).An
MVR receiver port can only
receive multicast traffic in a
multicast VLAN.
13
source-port
<port-list>
Sets the source port(s).An MVR
source port can send and
receive multicast traffic in a
multicast VLAN.
13
tagged <port-
list>
Sets the port(s) to tag VLAN
tags.
13
8021p-priority Sets the 802.1p priority for the
packets belonging to this VLAN
group.
13
Table 110 Command Summary: mvr Commands (continued)
COMMAND DESCRIPTION PRIVILEGE