ZyXEL Communications GS-4012F/4024 - Manual (Page 289)

GS-4012F/4024 User’s Guide
288 Chapter 42 Introducing Commands
42.11.6 config-vlan Commands
The following table lists the vlan commands in configuration mode.
rip direction
<Outgoing|Incoming|
Both|None> version
<v1|v2b|v2m>
Sets the RIP direction in this
routing domain as well as the
version number.
13
vrrp authentication-
key <k>
Sets the VRRP authentication key
in the routing domain.
13
no ip dvmrp Disables DVMRP in this routing
domain.
13
ip igmp Disables IP IGMP in this routing
domain.
13
ip ospf
authentication-key
Disables OSPF authentication
key settings in this routing
domain.
13
ip ospf
authentication-sama
Sets the routing domain not to
use the same OSPF
authentication settings as the
area.
13
ip ospf cost Disables the OSPF cost in the
routing domain.
13
ip ospf message-
digest-key
Sets the routing domain not to
use a security key in OSPF.
13
ip ospf priority Resets the OSPF priority for the
interface.
13
ip vrrp
authentication-key
Resets the VRRP authentication
settings.
13
Table 108 interface route-domain Commands (continued)
COMMAND DESCRIPTION
PRIVILEG
E
Table 109 Command Summary: config-vlan Commands
COMMAND DESCRIPTION PRIVILEGE
vlan
<vlan-
id>
Creates a new VLAN group. 13
exit Leaves the VLAN configuration
mode.
13
fixed <port-
list>
Specifies the port(s) to be a
permanent member of this VLAN
group.
13
forbidden
<port-list>
Specifies the port(s) you want to
prohibit from joining this VLAN
group.
13
help Displays a list of available VLAN
commands.
13