ZyXEL Communications GS-4012F/4024 - Manual (Page 314)

GS-4012F/4024 User’s Guide
Chapter 45 Interface Commands 313
Syntax:
bandwidth-limit
bandwidth-limit pir <Kbps>
bandwidth-limit cir <Kbps>
bandwidth-limit egress <Kbps>
where
An example is shown next.
• Enable port one for configuration.
• Enable bandwidth control.
• Set the outgoing traffic bandwidth limit to 5000Kbps.
• Set the guaranteed bandwidth allowed for incoming traffic to 4000Kbps.
• Set the maximum bandwidth allowed for incoming traffic to 8000Kbps.
45.2.5 mirror
The mirror command enables port mirroring on the interface.
Syntax:
mirror
mirror dir <ingress|egress|both>
where
An example is shown next.
pir <Kbps> = Sets the maximum bandwidth allowed for incoming traffic.
cir <Kbps> = Sets the guaranteed bandwidth allowed for incoming traffic.
egress <Kbps> = Sets the maximum bandwidth allowed for outgoing traffic
(egress) on the switch.
sysname(config)# interface port-channel 1
sysname(config-interface)# bandwidth-limit
sysname(config-interface)# bandwidth-limit egress 5000
sysname(config-interface)# bandwidth-limit cir 4000
sysname(config-interface)# bandwidth-limit pir 8000
dir
<ingress|egress|both> = Enables port mirroring for incoming, outgoing or both
incoming and outgoing traffic.
Port mirroring copies traffic from one or all ports to another
or all ports for external analysis.