ZyXEL Communications GS-4012F/4024 - Manual (Page 276)

GS-4012F/4024 User’s Guide
Chapter 42 Introducing Commands 275
snmp-server trap-
destination
<ip>
Disables sending of SNMP traps
to a station.
13
spanning-tree Disables STP. 13
<port-list> Disables STP on listed ports. 13
ssh key
<rsa1|rsa|dsa>
Disables the secure shell server
encryption key. Your switch
supports SSH versions 1 and 2
using RSA and DSA
authentication.
13
known-hosts
<host-ip>
Removes the specified remote
hosts from the list of all known
hosts.
13
known-hosts
<host-ip>
[1024|ssh-
rsa|ssh-dsa]
Removes remote known hosts
with the specified public key
(1024-bit RSA1, RSA or DSA).
13
storm-control Disables broadcast storm control. 13
syslog Disables syslog logging. 13
server <ip-
address>
Disables syslog logging to the
specified syslog server.
13
server <ip-
address>
inactive
Enables syslog logging to the
specified syslog server.
13
type [type] DIsables syslog logging for the
specified log type ( sys , link ,
config , error or report ).
13
timesync Disables timeserver settings. 13
trunk <T1|T2|T3|T4|T
5|T6>
Disables the specified trunk
group.
13
<T1|T2|T3|T4|T
5|T6>
interface
<port-list>
Removes ports from the specified
trunk group.
13
<T1|T2|T3|T4|T
5|T6> lacp
Disables LACP in the specified
trunk group.
13
vlan <vlan-id> Deletes the static VLAN entry. 13
vlan1q gvrp Disables GVRP on the switch. 13
port-isolation Disables port isolation. 13
vlan-stacking Disables VLAN stacking. 13
password Change the password for Enable
mode.
14
Table 106 Command Summary: Configuration Mode (continued)
COMMAND DESCRIPTION PRIVILEGE