ZyXEL Communications GS-4012F/4024 - Manual (Page 285)

GS-4012F/4024 User’s Guide
284 Chapter 42 Introducing Commands
<pkt/s> Sets the interface DLF limit in
packets per second (pps).
13
egress set
<port-list>
Sets the outgoing traffic port list for
a port-based VLAN.
13
exit Exits from the interface port-
channel command mode.
13
flow-control Enables interface flow control.
Flow control regulates
transmissions to match the
bandwidth of the receiving port.
13
frame-type
<all|tagged|unt
agged>
Choose to accept both tagged and
untagged incoming frames, just
tagged incoming frames or just
untagged incoming frames on a
port.
13
ge-spq <q0|q1|...|q7> Enables strict priority queuing
starting with the specified queue
and subsequent higher queues on
the Gigabit ports.
13
gvrp Enables this function to permit
VLAN groups beyond the local
switch.
13
help Displays a description of the
interface port-channel commands.
13
igmp-filtering profile
<profile>
Applies the specified IGMP filtering
profile.
13
igmp-group-
limited
Enables the IGMP group limiting
feature.
13
number <number> Sets the maximum number IGMP
groups allowed.
13
igmp-immediate-
leave
Enables the IGMP immediate
leave function.
13
igmp-querier-
mode
<auto|fixed|edg
e>
Sets the IGMP query mode for the
port.
13
inactive Disables the specified port(s) on
the switch.
13
ingress-check Enables the device to discard
incoming frames for VLANs that
are not included in a port member
set.
13
intrusion-lock Enables intrusion lock on the
port(s) and a port cannot be
connected again after you
disconnected the cable.
13
Table 107 interface port-channel Commands (continued)
COMMAND DESCRIPTION PRIVILEGE