ZyXEL Communications GS-4012F/4024 - Manual (Page 279)

GS-4012F/4024 User’s Guide
278 Chapter 42 Introducing Commands
no non-querier Disables non-querier mode on
the switch.
13
ospf <router-id> Enables and enters the OSPF
configuration mode.
13
area <area-id> Enables and sets the area ID. 13
area <area-id>
authentication
Enables simple authentication for
the area.
13
area <area-id>
authentication
message-digest
Enables MD5 authentication for
the area.
13
area <area-id>
default-cost
<0-16777214>
Sets the cost to the area. 13
area <area-id>
name <name>
Sets a descriptive name for the
area for identification purposes.
13
area <area-id>
stub
Enables and sets the area as a
stub area.
13
area <area-id>
stub no-
summary
Sets the stub area not to send
any LSA (Link State
Advertisement).
13
area <area-id>
virtual-link
<router-id>
Sets the virtual link ID information
for the area.
13
area <area-id>
virtual-link
<router-id>
authentication
-key <key>
Enables simple authentication
and sets the authentication key
for the specified virtual link in the
area.
13
area <area-id>
virtual-link
<router-id>
authentication
-same-as-area
Sets the virtual link to use the
same authentication method as
the area.
13
area <area-id>
virtual-link
<router-id>
message-
digest-key
<keyid> md5
<key>
Enables MD5 authentication and
sets the key ID and key for the
virtual link in the area.
13
area <area-id>
virtual-link
<router-id>
name <name>
Sets a descriptive name for the
virtual link for identification
purposes.
13
exit Leaves the router OSPF
configuration mode.
13
Table 106 Command Summary: Configuration Mode (continued)
COMMAND DESCRIPTION PRIVILEGE