Zebra Technologies Zebra Z4000 - Manual (Page 27)

Cleaning
CAUTION: Use only the cleaning agents indicated. Zebra Technolo-
gies Corporation will not be responsible for damage caused by any
other cleaning materials used on the Z Series™ printer.
Table 1 provides a recommended cleaning schedule. Cleaning Swabs
saturated with 70% Isopropyl Alcohol are available from your Zebra
distributor as a Preventive Maintenance Kit (part # 01429).
Cleaning the Exterior
The exterior of the Z Series™ printer may be cleaned with a lint-free
cloth. Do not use harsh, abrasive cleaning agents or solvents. If neces-
sary, a mild detergent or desktop cleaner may be used sparingly.
Z Series™ User’s Guide 19
Care & Adjustments
AREA METHOD INTERVAL
See Figure 10 for parts callouts. After every roll of media (or
500 feet of fanfold media)
when printing in the direct
thermal mode.
After every roll of ribbon
when printing in the
thermal transfer mode.
Printhead (q) Alcohol
Platen Roller (r) Alcohol
Media Sensor (o) Air Blow
Media Path (See Figure 3 or 4) Alcohol
Ribbon Sensor (k) Air Blow
Ribbon Path (See Figure 5) Alcohol
Cutter
Assembly
Dust build-up
Adhesive build-up
Air Blow
Citrus-Based
Cleaner
such as
Goo-Gone ®
After every two to three
rolls of media.
After every roll of media or
more often depending upon
your application and the
type of media being cut.
Tear-Off/Peel-Off Bar Alcohol Once per month.
Peel Blade Alcohol After every roll of media or
more often depending upon
your application and media.
Label Available Sensor (z)
(See Fig. 17)
Air Blow Once per six months.
Table 1. Recommended Cleaning Schedule
27
H:...uspiran2.vp
Thu Jun 18 15:57:39 1998
Color profile: Disabled
Composite Default screen