Zebra Technologies Zebra Z4000 - Manual (Page 73)

Z Series™ User’s Guide 65
COMMUNICATIONS
PARAMETER SELECTIONS
NETWORK ID
(password
required)
The network ID is used to assign a unique number to
a printer used in a network. This gives the host the
means to address a specific printer.
Default: 000 Choices: 000 to 999
NOTE: If the printer is used in a network, you must
select a network ID number
COMMUNICATIONS
(password
required)
The communications diagnostics mode is a trouble-
shooting tool for checking the interconnection
between the printer and the host. When “Diagnostics“
is selected, all data sent from the host to the printer
will be printed as straight ASCII hex characters. All
received characters, including control codes like CR
(Carriage Return), are printed.
Default: Normal Mode
Choices: Normal Mode or Diagnostics Mode
NOTES: An FE indicates a framing error.
An OE indicates an overrun error.
An PE indicates a parity error.
An NE indicates noise.
If errors are indicated, check that your
communication parameters are correct.
PRINT LISTINGS
PARAMETER SELECTIONS
LIST FONTS Press “+” to print a list of all standard and optional
fonts currently available in the printer.
LIST BARCODES Press “+” to print a list of all the barcodes currently
available in the printer.
LIST IMAGES Press “+” to print a list of all the images currently
available in the printer.
LIST FORMATS Press “+” to print a list of all the formats currently
available in the printer.
LIST SETUP Press “+” to print the printer’s current configuration.
LIST ALL Press “+” to print all of the previously indicated lists.
Continued on the following page.
73
H:...uspiran2.vp
Thu Jun 18 16:03:36 1998
Color profile: Disabled
Composite Default screen