Zebra Technologies Zebra Z4000 - Manual (Page 33)

Lubrication
CAUTION! No lubricating agents of any kind should be used on this
printer! Some commercially available lubricants, if used, will damage
the finish and the mechanical parts inside the printer.
Printhead Pressure Adjustment
Printhead pressure is adjustable to insure maximum print quality. Refer
to Figure 13 and rotate the Pressure Adjustment Dials(s & t) clockwise
to increase the pressure or counterclockwise to decrease the pressure of
the printhead against the ribbon and/or media.
The amount of pressure required varies from one application to the next
and is determined by the type and thickness of the media as well as the
media width.
If using narrow media, you may need to reduce the pressure applied by
the right hand dial to minimize the pressure over the unused printhead
area.
Z Series™ User’s Guide 25
t s
Figure 13. Printhead Pressure Adjustment
33
H:...uspiran2.vp
Thu Jun 18 15:58:03 1998
Color profile: Disabled
Composite Default screen