Zebra Technologies Zebra Z4000 - Manual (Page 76)

68 Z Series™ User’s Guide
ZPL CONTROL
PARAMETER SELECTIONS
CONTROL PREFIX
(password
required)
The printer looks for this 2-digit hex value to
indicate the start of a ZPL/ZPL II Control instruction.
Refer to the ZPL II Programming Guide for more
information.
Default: 7E (tilde - displayed as a black square)
Choices: most hex values between 00 and FF
(exclude the values indicated on the ASCII
Code Chart in Appendix C)
FORMAT PREFIX
(password
required)
The printer looks for this 2-digit hex value to
indicate the start of a ZPL/ZPL II Format instruction.
Refer to the ZPL II Programming Guide for more
information.
Default: 5E (caret)
Choices: most hex values between 00 and FF
(exclude the values indicated on the ASCII
Code Chart in Appendix C)
DELIMITER CHAR
(password
required)
The printer looks for this 2-digit hex value used as a
parameter place marker in ZPL/ZPL II instruction.
Refer to the ZPL II Programming Guide for more
information.
Default: 2C (comma)
Choices: most hex values between 00 and FF
(exclude the values indicated on the ASCII
Code Chart in Appendix C)
ZPL MODE
(password
required)
The printer will remain in the selected mode until it
is changed by this parameter or by sending a
ZPL/ZPL II command. The printer accepts label
formats written in either ZPL or ZPL II. This
eliminates the need to rewrite any ZPL formats you
already have. Refer to the ZPL II Programming
Guide for more information.
Default: ZPL II
Choices: ZPL II or ZPL
Continued on the following page.
76
H:...uspiran2.vp
Thu Jun 18 16:03:37 1998
Color profile: Disabled
Composite Default screen