Edimax Technology IC-7000PTn V2 - Manual (Page 25)

2.3.2 WLAN
The descriptions of every setting in this menu will be given below:
Item Description
Wireless
Connection
Select ‘Enable’ to activate wireless network function of this IP camera, select
‘Disable’ to disable it.
Network Type
Select the network type of wireless connection.
Available options are ‘Infrastructure’ (Connect the IP camera to a wireless
access point), and ‘Adhoc’ (This IP camera will become a stand-alone wireless
network point, other wireless computers / devices can discover this IP camera
and connect to it without wireless access point).
You can set to ‘Adhoc’ when you don’t have any wireless access point, but your
computer has wireless network card. Set to ‘Infrastructure’ when you have
wireless access point, and you have computers with wired network connection.
Available
Networks
Here shows all wireless access points found by this IP camera. Please note not
all access points will be displayed at the same time, if the access point you
expected to connect does not appear, you may have to click ‘Refresh’ button for
several times until it appears.
The descriptions of all fields is listed below:
Connect: You can select the wireless access point you wish to connect here.
SSID: the SSID of all found wireless access points will be shown here. Some
wireless access point may hide their SSID; in this case, you have to identify
them by their MAC address.
25